"Low carbon environmental protection, energy conservation and emission reduction" is one of the important issues in the 12th Five-Year Plan. As a leader in the exhibition services for the rubber and plastics industry, Adsale has long maintained a high degree of concern for the sustainable development of the rubber and plastics industry. The two-day "low-carbon plastic forum" will be held in Guangzhou during the "CHINAPLAS2011 China International Plastics and Rubber Exhibition" on May 18-19 this year. The theme of last year's "Green Manufacturing, Plastic Future" will be on environmental protection plastics, recycling technology and energy-saving technologies. Three issues were explored.
“We believe that green manufacturing will become a trend,†said Jasmin Zhu, the chairman of Adsale, when he discussed the forum. “At present, the world is implementing a low-carbon economy. The Chinese government has also included environmental protection and energy conservation in the 12th five-year development plan. Therefore, Adsale will increase its investment in environmental protection-related fields in future exhibitions, provide more and better display platforms for green manufacturing technologies, and strive to promote the establishment of related industry standards and the rapid promotion of applications. The waste plastic bottles will be collected at the exhibition site to create an unprecedented plastic sculpture, inviting everyone to celebrate and at the same time hope that each participant can feel the importance of green technology for the development of the entire industry."
Concerned about low-carbon manufacturing, policy support Decomposition of plastics industry related to degradable plastics supporting policies are expected to be introduced in the second half of the year, the planned support objects include bio-based materials, fully degradable materials, support methods include VAT return, tax relief, procurement of key projects, etc. . The Ministry of Industry and Information Technology has handed over relevant policy documents to the relevant ministries and commissions such as the Ministry of Housing and Construction for the countersigning. Luo Baihui, secretary-general of the International Mould, Hardware and Plastics Industry Suppliers Association, said that the policy would be beneficial to companies listed in the degradable plastics industry. The market for PBS and PBAT that are suitable for film blowing in degradable materials is relatively large, and the listed companies involved include Xinfu Pharmaceutical and Blonde Technology.
Concerned about the green future, the high-end market favors modified plastics-modified plastics, which are part of the supply chain of petrochemical products, and the end of the material supply chain. According to Luo Baihui, the general secretary of the International Mould and Hardware and Plastics Industry Suppliers Association, modified plastics have a wide range of applications. Their market segments include home appliances, automobiles, wire and cable, toys, energy-saving lamps, power tools, and office equipment.
Harbin Shuntong Engineering Plastics Co., Ltd. is a company specializing in the production and research and development of plastic modified new materials. Its 200,000 tons plastic new material project is the largest investment project for China's high quality automotive special With the strong support of the province and Harbin, the current major project that has been listed as a provincial key project is accelerating its construction. According to Chen Xigang, general manager of the company, Yutong uses advanced and reliable modified plastic technology accumulated over 27 years. At present, 90% of the company's products are mainly used in the automotive sector. The number of automotive-specific modified plastic products has grown from the initial tens of tons to the current nearly 11 million tons, fully meeting the technical requirements of imported products, and has been used by more than a dozen OEMs. More than 60 models, of which more than 20 kinds of materials such as special materials for automotive air conditioners, were designated as exclusive suppliers by FAW-Volkswagen, SAIC GM and other OEMs. The company plans to expand into high-end applications by 2013. The proportion of high-value-added products such as high-speed trains, ship power, and aerospace will account for 30% of the total, which will break the monopoly of similar products and gradually replace imports.
The total investment of the 200,000-ton plastic modified new material project in Qintong is 1.44 billion yuan, which is divided into two phases. After the first phase of the project is put into production, the annual comprehensive output will be 100,000 tons, with an annual sales income of 1.496 billion yuan and a total profit of 315 million yuan. After all the projects have been completed, the annual sales revenue will increase by 3.158 billion yuan and the total profit will be 703 million yuan. About 150,000 tons of PP and ABS resin from Daqing Petrochemical Company can be digested to produce 200,000 tons of automotive modified plastics and high value-added polymer modified materials, which can meet the needs of the surrounding area. The demand of many auto parts manufacturers for modified plastic products directly or indirectly creates about 20,000 jobs, forming a profitable industrial chain.
When it comes to the future, Chen Xigang, general manager, is full of confidence. He said that the project was listed as one of the 22 signed projects of the mayor of Harbin and the governor of Heilongjiang province in 2010 and the provincial key projects; in July 2010, with the support of the provincial and Harbin Municipal Development and Reform Commission, it was listed as “ The capital support project for the adjustment or reconstruction of the old industrial base in northeast China has received investment of 26.74 million yuan from the country, which has effectively promoted the project construction. Qitong will complete the project on time, achieve production as soon as possible, and strive to become Asia's leading supplier of high-quality automotive modified plastics and new materials, changing the state of China's engineering plastics new material products mainly rely on imports.
“We believe that green manufacturing will become a trend,†said Jasmin Zhu, the chairman of Adsale, when he discussed the forum. “At present, the world is implementing a low-carbon economy. The Chinese government has also included environmental protection and energy conservation in the 12th five-year development plan. Therefore, Adsale will increase its investment in environmental protection-related fields in future exhibitions, provide more and better display platforms for green manufacturing technologies, and strive to promote the establishment of related industry standards and the rapid promotion of applications. The waste plastic bottles will be collected at the exhibition site to create an unprecedented plastic sculpture, inviting everyone to celebrate and at the same time hope that each participant can feel the importance of green technology for the development of the entire industry."
Concerned about low-carbon manufacturing, policy support Decomposition of plastics industry related to degradable plastics supporting policies are expected to be introduced in the second half of the year, the planned support objects include bio-based materials, fully degradable materials, support methods include VAT return, tax relief, procurement of key projects, etc. . The Ministry of Industry and Information Technology has handed over relevant policy documents to the relevant ministries and commissions such as the Ministry of Housing and Construction for the countersigning. Luo Baihui, secretary-general of the International Mould, Hardware and Plastics Industry Suppliers Association, said that the policy would be beneficial to companies listed in the degradable plastics industry. The market for PBS and PBAT that are suitable for film blowing in degradable materials is relatively large, and the listed companies involved include Xinfu Pharmaceutical and Blonde Technology.
Concerned about the green future, the high-end market favors modified plastics-modified plastics, which are part of the supply chain of petrochemical products, and the end of the material supply chain. According to Luo Baihui, the general secretary of the International Mould and Hardware and Plastics Industry Suppliers Association, modified plastics have a wide range of applications. Their market segments include home appliances, automobiles, wire and cable, toys, energy-saving lamps, power tools, and office equipment.
Harbin Shuntong Engineering Plastics Co., Ltd. is a company specializing in the production and research and development of plastic modified new materials. Its 200,000 tons plastic new material project is the largest investment project for China's high quality automotive special With the strong support of the province and Harbin, the current major project that has been listed as a provincial key project is accelerating its construction. According to Chen Xigang, general manager of the company, Yutong uses advanced and reliable modified plastic technology accumulated over 27 years. At present, 90% of the company's products are mainly used in the automotive sector. The number of automotive-specific modified plastic products has grown from the initial tens of tons to the current nearly 11 million tons, fully meeting the technical requirements of imported products, and has been used by more than a dozen OEMs. More than 60 models, of which more than 20 kinds of materials such as special materials for automotive air conditioners, were designated as exclusive suppliers by FAW-Volkswagen, SAIC GM and other OEMs. The company plans to expand into high-end applications by 2013. The proportion of high-value-added products such as high-speed trains, ship power, and aerospace will account for 30% of the total, which will break the monopoly of similar products and gradually replace imports.
The total investment of the 200,000-ton plastic modified new material project in Qintong is 1.44 billion yuan, which is divided into two phases. After the first phase of the project is put into production, the annual comprehensive output will be 100,000 tons, with an annual sales income of 1.496 billion yuan and a total profit of 315 million yuan. After all the projects have been completed, the annual sales revenue will increase by 3.158 billion yuan and the total profit will be 703 million yuan. About 150,000 tons of PP and ABS resin from Daqing Petrochemical Company can be digested to produce 200,000 tons of automotive modified plastics and high value-added polymer modified materials, which can meet the needs of the surrounding area. The demand of many auto parts manufacturers for modified plastic products directly or indirectly creates about 20,000 jobs, forming a profitable industrial chain.
When it comes to the future, Chen Xigang, general manager, is full of confidence. He said that the project was listed as one of the 22 signed projects of the mayor of Harbin and the governor of Heilongjiang province in 2010 and the provincial key projects; in July 2010, with the support of the provincial and Harbin Municipal Development and Reform Commission, it was listed as “ The capital support project for the adjustment or reconstruction of the old industrial base in northeast China has received investment of 26.74 million yuan from the country, which has effectively promoted the project construction. Qitong will complete the project on time, achieve production as soon as possible, and strive to become Asia's leading supplier of high-quality automotive modified plastics and new materials, changing the state of China's engineering plastics new material products mainly rely on imports.
The product is an internal driving device for all kinds of fixed belt conveyor. Compared with the external driving device, it has the characteristics of compact structure, small space area, convenient maintenance, safe and reliable operation, good sealing, and suitable for dust concentration and wet and muddy working place.
In addition to the structural drum pulley advantages, we provide additional services with every conveyor pulley order:
• Engineering capabilities.(We can engineer and custom build pulleys to your requirements utilizing software tools such as Finite Element Analysis).
• In- house manufactured hubs and shafts.
• This ensures consistency and compatibility of components of the pulley.
• Reinforced Mine Duty pulleys are available.
• In- house assembly of complete pulley unit including: bushing, shaft, bearings and gear box.
• Dynamic or Static balancing upon request.
Conveyor Drive Pulley,Composite Conveyor Drive Pulley, Rubber Conveyor Drive Pulley,Mining Conveyor Motor Pulley
Hebei Hosan Machine Equipment Co.,Ltd , http://www.hosanmachinery.com