According to the statistics of the China Association of Automobile Manufacturers, in April 2011, the automobile production and sales situation continued to show a trend of low growth, and the overall performance was as follows:
I. Overall completion
In April 2011, the production and sales of automobiles were completed respectively 1.5353 million and 1.5520 million vehicles, which was a decrease of 15.98% and 15.12% compared with March, respectively, which was a decrease of 1.85% and 0.25% compared with the same period of 2010; 2011 1- In April, the production and sales of automobiles reached 6,413,100 units and 6,533,900 units respectively, an increase of 5.09% and 5.95% year-on-year, respectively, representing an increase of 58.71 and 54.56 percentage points respectively from the same period of 2010.
In April 2011, the auto market continued its downturn in March. The auto production and sales experienced the first negative growth in 27 months since February 2009. It was also the first negative growth after China’s auto industry resumed growth since the financial crisis. The overall situation is not optimistic. There are still five reasons that affect the growth of the auto industry: the withdrawal of policies such as purchase tax concessions and the impact of the state’s macro-control, the continuous rise in fuel prices, the impact of the implementation of some city-restricted purchase restrictions, and the policy of access to fuel consumption The impact of the implementation of the earthquake in Japan, including the impact of the Japanese earthquake in April is more apparent. While the production and sales of domestic cars have grown at a low rate, the import and export of automobiles have shown rapid growth.
Second, the majority of models dropped month-on-month, and the passenger car production and sales are better than those of commercial vehicles.
In April 2011, the domestic production and sales of commercial vehicles fell by more than 10% year-on-year. From a year earlier, commercial vehicles fell significantly.
In April 2011, the production and sales of commercial vehicles were completed at 377,700 units and 409,700 units respectively, a decrease of 14.69% and 14.81% respectively from the previous month. In addition to the sequential increase in the number of non-completed passenger vehicles, the remaining models showed declines in different magnitudes; During the same period of comparison, the production and sales of commercial vehicles decreased by 10.10% and 7.84%, respectively. Excluding the year-on-year increase in passenger car sales, the remaining models were lower than the same period in 2010.
From January to April 2011, the performance of trucks in commercial vehicles was significantly worse than that of passenger cars. The state's control of the macro economy was evident in the truck market.
From January to April 2011, the production and sales of commercial vehicles completed 1,522,200 and 1,548,300 vehicles, respectively, an increase of 0.54% and 1.08% year-on-year, respectively, down 4.12 and 3.78 percentage points from January to March 2011 respectively. By model, the production and sales of semi-trailer tractors fell by 22.83% and 24.64%, respectively, which was the biggest drop. The non-completed passenger vehicles and non-integrated trucks were also lower than the same period of 2010; the growth of passenger car sales was 9.21% and 13.01% year-on-year respectively. As the fastest growing commercial vehicle model, the production and sales of trucks grew by less than 4% year-on-year.
Third, auto exports exceeded 60,000 again
In April 2011, automobile enterprises exported 67,500 vehicles, an increase of 7.09% from the previous month, and the year-on-year growth rate was 69.74%. From January to April, 225,400 vehicles were exported, an increase of 56.72% over the same period of 2010. At present, although China's auto export volume is still at a relatively low level, in the increasingly fierce competition in the domestic market, industry companies are paying more and more attention to the international market, and the pace of going out is gradually accelerating.
Commercial vehicles exported 30,600 vehicles, an increase of 3.16% over March; an increase of 30.86% compared with the same period in 2010. From January to April 2011, commercial vehicles exported 102,100 vehicles, an increase of 36.66% year-on-year.
From January to April 2011, the top five export vehicle manufacturers were Chery, Chang'an, Great Wall, Jianghuai and Dongfeng, with exports of 41.100, 2.80, 2.18, 20.06, and 18,500 respectively. Vehicles, compared with the same period in 2010, increased by 86.99%, 52.79%, 31.64%, 2.07 times and 36.76% respectively, and the proportion of the top five exports accounted for 57.70% of total exports.
According to the import and export data of the customs, in March 2011, the import and export of auto goods showed a rapid growth. In March, the total import and export volume of automobile products was US$ 12.383 billion, which was an increase of 65.57% month-on-month and an increase of 31.89% year-on-year. The import value was US$6.954 billion, a year-on-year increase of 65.58%, and a year-on-year increase of 23.71%; the value of exports was US$5.429 billion, a year-on-year increase of 65.56% and a year-on-year increase of 44.06%. From January to March 2011, the total import and export volume of auto products nationwide was 30.964 billion U.S. dollars, a year-on-year increase of 32.46%, of which the import value was 17.03 billion U.S. dollars, an increase of 31.45% year-on-year, and the export value was 13.934 billion U.S. dollars, an increase of 33.70% year-on-year.
In March 2011, the total vehicle imports reached 97,900, an increase of 70.97% month-on-month and a year-on-year increase of 14.68%. From January to March 2011, cumulative total of 236,500 vehicles of various types were imported, an increase of 31.69% year-on-year. In March 2011, total vehicle exports totaled 65,000 vehicles, an increase of 58.67% month-on-month and a year-on-year increase of 62.27%. From January to March 2011, the total number of exported automobiles was 163,800, an increase of 54.17% year-on-year.
Mechanical Power Press Machine drives the flywheel by motor, drives the crankshaft connecting rod mechanism by clutch and transmission gear to move the slider up and down, and drives the tensile mold to shape the steel plate.And the power press has two sliders, divided into sliding block inside and outside the slider, within the slider drive mould punch or die, outside the pressure of the slider to drive mould to coil, pressure rim first action during tensile steel edge, inner sliding block action stretch again.
Mechanical Power Press Machine is used for blanking, punching, bending and forming of small and medium-sized single-engined thin steel plates and high-speed progressive die parts. It is characterized by high-precision, high-yield and high-stability continuous stamping operations.
Mechanical Power Press Machine
Mechanical Power Press Machine,Power Press Machine,Single Crank Power Press Machine,sheet metal Power Press Machine
Mayflay Machinery(huizhou) Co.,LTD , http://www.pressfeeders.com