A diesel engine that had already been scrapped was sent in from one of the entrances to the workshop. After a series of processes, the exit at the Other end of the workshop became a brand-new engine. This was the reporter’s late April in Weichai. Remanufacturing companies see the scene.
"These remanufactured engines have the same 'three' compared to ordinary new engines: the same as the new ones, the economy is the same as the new ones, and the warranty period is the same as the new ones." Weichai Remanufacturing Corp. Li Feng, the general manager, introduced people who came to attend the "Green Manufacturing High-Level Forum."
A large number of waste machinery and equipment are gathered together, and the disassembled waste parts are blanks. The surface engineering technology is used to repair the rough batches, and the service capacity of the used machines is reinstated. This process is “remanufacturingâ€.
Since the remanufactured "raw material" is derived from scrapped old parts, people say that remanufacturing is excavation of "urban gold mines."
Remanufacturing is a green manufacturing technology. Its important feature is that the quality and performance of remanufactured products meet or exceed new products, but since the remanufacturing process is only the restoration of original parts, the cost is 50 percent of new products. %, and it can save energy by 60%, save more than 70% of materials, and significantly reduce the adverse impact on the environment.
Take the Weichai engine remanufacturing as an example: On an engine that is scrapped on the market, consumers can sell it to Weichai at a price of 25% of the new machine. After remanufacturing, consumers will use the new machine at a price of 70%-75%. buy. In this way, as long as half the money is spent, users can have a remanufactured new machine.
According to the data obtained from Weichai's power production practice, the added value of the production of 10,000 remanufactured engines is close to 360 million yuan, which can save 14.5 million kWh. In addition, compared with remanufactured new products, remanufacturing can save energy by 60%, reduce air pollutant emissions by 80%, and have obvious energy saving and emission reduction effects. According to statistics, by the end of 2010, the market volume of WD-series engines will reach 2.2 million units, and more and more engines are entering or undergoing major repairs. The pressure on the engine maintenance service is increasing day by day; on the other hand, Due to factors such as long engine overhaul time and low maintenance quality, it is imperative for customers to have a high quality, low price product to replace the overhaul. This provides a very large potential demand space for the launch of remanufactured engines.
On March 2, 2008, China's Auto parts remanufacturing pilot began. The National Development and Reform Commission formally approved the approval of 14 pilot companies, including FAW and Weichai, and identified the scope of remanufactured products, including engines, transmissions, steering gears, generators, and starters.
Li Feng said that Weichai Remanufacturing Corp. began batch production in January 2009. Last year, it produced a total of 1,679 remanufactured engines and achieved sales revenue of 30.97 million yuan. As of March this year, a total of 2,896 remanufactured engines were produced. Now, production has increased month by month, and the entire market has shown a good situation in which demand exceeds supply. The development goal of Weichai's remanufacturing industry is to build 10,000 units next year and reach 100,000 units by 2020, becoming a new growth point for Weichai.
At present, Weichai distributes 36 service centers and 2,700 service stations across the country to form a complete marketing service network. Through this network, it is possible to collect users' scrapped engines, and to sell and maintain the remanufactured engines to form a closed loop logistics network.
China National Automobile Industry Association deputy secretary-general Qi Yiping said that by 2015, China’s automobile production and sales volume will reach 22 million units, and the vehicle ownership will reach 134 million units; by 2020, the automobile production and sales volume will reach 25 to 30 million vehicles. Car ownership will exceed 200 million vehicles. At the same time, the demand for spare parts for automobiles is also huge. Taking 2015 as an example, the demand for spare parts will reach 610 billion yuan. If 5% of remanufactured parts are used, the demand will also reach 25.5 billion yuan. All this shows that the remanufacturing market is a huge demand.
Aluminium Electronic Housing,Stainless Steel Railing,Stamping Zinc Alloy Part,Door Ring Board Parts
SOMAX ENTERPRISE CO., LTD. , http://www.twdiecastings.com