First, the helmet
1. Before using the helmet, check whether the cap shell, cap liner and cap strip are complete and effective.
2. Before using the helmet, adjust the helmet lining to make the space between the cap lining and the cap shell.
3, hat hoop should be adjusted according to the type of head tight, in order to prevent the head down when the hat slipped to block the line of sight.
4. It is forbidden to combine two layers of top helmet linings into one layer.
5. The helmet should be worn tight and worn, and the cap should be fastened under the jaw.
6. The effective period of the helmet shall be calculated from the date of completion of manufacture of the product. The plastic cap shall not exceed two and a half years and the glass-fiber cap shall not exceed three and a half years.
Second, the seat belt 1. The seat belt must be inspected by the inspection unit every six months before it can be used.
2, when working in the following conditions, should be wearing seat belts:
(1) It is possible to work at heights. When entering the workplace, one must wear a seat belt;
(2) At heights exceeding 2 meters in height;
(3) Work on scaffolds without scaffolding or without a bar, when the height exceeds 1.5 meters;
(4) When sloping roof work;
(5) Flat-roofed houses, when there is no protective fence within 1.2m from the roof edge or roof opening;
(6) any suspended platform or bench;
(7) any guardrails, planking on incomplete scaffolding;
(8) Close to a ladder near a roof or floor opening;
(9) When there is no reliable anti-fall measure at high altitude operations.
3, how to use the seat belt correctly:
(1) To tighten the belt, the buckle assembly must be fastened;
(2) When using a seat belt for suspending work, do not hook the hook directly on the belt, and hook it on the hanging ring of the belt;
(3) It is forbidden to hang the seat belt on a member that is not firm or has a sharp corner;
(4) The use of the same type of safety belt, the parts can not be replaced without authorization;
(5) Seat belts that have been severely impacted cannot be used even if their appearance has not changed;
(6) It is forbidden to use the safety belt to transfer heavy objects;
(7) Seat belts should be hung on the top of a firm and reliable place, not less than the waist height.
Third, safety rope 1. In order to ensure that high-altitude workers always have safety assurance during the movement, when carrying out special dangerous operations, it is required to hang on the safety rope while fastening the safety belt.
2. It is prohibited to use hemp rope as a safety rope.
3, use a long rope more than 3 meters to add buffer.
4. A safety rope cannot be used by two people at the same time.
Fourth, differential protector 1, self-locking device should be checked before use.
2, self-locking hook, should be hanging on the seat belt metal ring.
3. Self-locking devices that have been severely impacted should stop using them.
Hot and cold tape materials cutting machine
Flying Man automatic hot and cold roll to sheet cutting machine is suitable for Webbing cutting, Belt cutting, Elastic Belt cutting, Zipper cutting, Velcro cutting, Nylon Webbing cutting, Ribbon cutting, Backpack belt cutting, etc.
This webbing cutting machine adopts imported cutting tools, sharp wear-resisting, durable, smooth and beautiful incision, microcomputer controlled, easy to operate.
Nylon Webbing Cutter,Ribbon Cutting Machine,Fabric Strip Cutting Machine,Hot And Cold Cutting Machine
Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.zjflyingman.com