- Model NO.: customize
- Size: Customize
- Nitrided Layer Depth: 0.5-0.8mm
- Trademark: ZHONGYANG
- Origin: China
- Screw: Single-Screw
- Material: Nitriding Steel
- Nitrided Hardness: HRC56-58
- Specification: ISO 9001: 2008 approved
- HS Code: 84779000
Screw Diameter: D15-D300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and vented type etc.
Technical Information
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT
Bimetallic alloy materials:
(1)Fe-based alloy
(2)Ni-based alloy/Deloro alloy
(3)Co-based alloy
(4)NiCo-based alloy
(5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Focus on quality and service.
Experienced manufacturer, we will be the best choice.
Others Home Appliance Stamping Parts
Metal Stamping Parts,Refrigerator Stamping Parts,Stamping Auto Die
Stamping Die,Progressive Dies Co., Ltd. , http://www.cnstampingdie.com