Flowmeter selection type installation maintenance and maintenance of several major factors:
1. There must be no strong external magnetic field interference and strong mechanical vibration around the flowmeter. Before installation, environmental conditions should be reviewed and used in accordance with its use requirements for normal use;
2. When the flowmeter is installed outdoors, the upper part shall be covered to prevent rainwater dripping and sun exposure from affecting the life of the flowmeter; the flowmeter may be installed at any angle, the direction of fluid flow is consistent with the direction indicated on the housing, and the flowmeter The upper and lower reaches of the pipeline are guaranteed to have straight pipe sections of 3DN and 1DN respectively;
3. The flowmeter should be installed coaxially with the pipe. The connection of the flange screw holes should be parallel to the pipe axis and prevent the gasket and grease from entering the pipe cavity; if necessary, a filter can be installed upstream of the flowmeter to filter out the medium. Particle debris;
4. When installing flowmeters and measuring pipelines, consider installing telescopic tubes and corrugated tubes, and according to the actual size of the flowmeter, properly lay upstream and downstream pipelines so that the deformation of flowmeters caused by pipeline stress is minimized;
5. The flow meter volume corrector shell is provided with a grounding screw. When using it, it must be grounded as specified, but it must not share the ground wire with the strong electric system; when installing or testing on the pipeline, the ground wire and flow wire of the welding system must not be grounded. Lap
6. During use, users are not allowed to change the linking method of the explosion-proof system and change the interface of each lead wire. The introduction cable has an outer diameter of 8-8.5mm, and the remaining introduction holes are blocked by applying plugging. The installation and use and maintenance must comply with the relevant provisions of the design specifications of the electrical installations for explosion and fire hazard areas.
7. When the flowmeter needs signal remote transmission, it shall strictly follow the “electrical performance index†to access the external power supply, and it is forbidden to directly connect the 220VAC or 380VAC power supply at the signal output port; it is forbidden to use the standard welding connection method when installing the flowmeter. Lan, it is recommended to use process piping so as not to burn the internal parts of the flowmeter;
8. For newly installed or overhauled pipelines, purging must be strictly performed. Remove the impurities in the pipeline and then install the flowmeter. During the hydrostatic pressure test and cleaning pipeline operation, remove the instrumentation process piping instead.
Double-head Powder Filling Machine
Milk Coffee Protein Powder Automatic Powder Auger Dosing Filling Canning Machine Line for Cans Tins Jars Bottles
Filling machine →Capping Machine (or sealing machine) → bottle Aluminum Foil Sealing Machine → Labeling Machine → inkjet machine → Chain conveyor
belt → packing platform, according to the requirements of the product selection pipeline configuration;
2. The entire production line of the machine for the appearance of all stainless steel, all the machinery structure are in
accordance with the selection of food and drug hygiene standards;
3. The whole line of equipment according to GMP standard design, fully meet the national food and drug health requirements. The
real line of the fully automated action to ensure that the entire production process will not contact the product staff, the
production process is completely transparent and more reliable;
4. And the material in contact with the inner wall of the container are polished, often wash the structure of the use of easy to
split pieces of connection to ensure that shift or change the product when dealing with hygienic convenience;
5. To the factory site survey, field design the best production program; free production line of other aspects of technical
support.
|
Production capacity
|
30-60 bottles/min.
|
|
Material
|
304 SST
|
|
Package weight
|
100~5000g
|
|
Packaging accuracy
|
100~5000g<=±1.5g
|
|
Total power
|
2.3KW
|
|
Power supply
|
380V,50-60Hz
|
|
Weight
|
280KG
|
|
Dimension
|
850(L)*1200(W)*1800(H)mm
|
Double-Head Powder Filling Machine,Auger Dosing Filling Machine For Powder,Coconut Powder Filling Line
Guangdong Xtime Packaging Equipment Co., Ltd. , https://www.xtimepackaging.com