120L-160L Blow Molding Machine
- Double Drawbar clamping mechanism
- Perfect Usage for Chemical Drum, Road barrier, ABS car bumper
-Â High clamping force with short production cycle
- Patented Technology Die head system
- Optional Transparent line
Configuration List
| PLC | MITSUBISHI | Japan |
| Touch Screen | HITECH | Taiwan |
| Inverter | MITSUBISHI | Japan |
| Power Supply | MEAN WELL | Taiwan |
| Relay | OMRON | Japan |
| Hydraulic Valves | YUKEN | Japan |
| Hydraulic Pump | YUKEN | Japan |
| Contactors | LS(LG) | Korea |
| Solid relay | FOTEK | Japan |
| Breaker | LS(LG) | Korea |
| Temperature Control Module | MITSUBISHI | Japan |
| Oil Sealing | DZ | Taiwan |
| Oil Tube | LIEBAO | Taiwan |
| Transducer | GEFRAN | Italy |
| Proximity Switch | SONON | China |
| Motor | SIEMENS | China |
| Air Valve | FESTO | Germany |
| Parison Controller | Moog | Japan |
| Servo Valve | Moog | Japan |
Parameters:
| Â Material | Â | PE,PP,ABS... | |
|  Max container capacity | L | 160 | |
|  Output(dry cycle) | pc/hr | 300 | |
|  Machine dimension(L×W×H) | M | 6.8×3.3×5.0 | |
|  Machine weight | T | 23 | |
|  Clamping Unit |  |  | |
|  Clamping force | kn | 880 | |
| Mold platen size(W×H) | mm | 1100×1400 | |
|  Platen opening stroke | mm | 600-1400 | |
|  Platen moving stroke | mm | 800 | |
|  Max mold size(W×H) | mm | 1000×1600 | |
|  Mold thickness | mm | 610-700 | |
| Â Power | Â | Â | |
|  Servo oil pump motor power | KW | 22 | |
|  Servo pump displacement | L/MIN | 150 | |
|  Blow pressure | MPA | 1 | |
|  Air consumption | M3/MIN | 1.8 | |
|  Cooling water pressure | mpa | 0.5 | |
|  Water consumption | L/min | 60 | |
|  Average energy consumption | KW | 70-80 | |
|  Extruder unit |  |  | |
|  Screw diameter | mm | 110 | |
|  Screw L/D ratio | L/D | 25 | |
| HDPE Melting capacit for HDPE | kg/hr | 180-220 | |
|  Number of heating zone | zone | 6 | |
|  Screw heating power | kw | 30.2 | |
|  Screw fan power | KW | 0.6 | |
|  Extruder motor power | kw | 75 | |
|  Die head |  |  | |
|  Number of heating zone for single die head | zone | 6 | |
|  Heating power for single die head | kw | 31.2 | |
|  Max die-pin diameter | mm | 520 | |
|  Accumulator capacity | L | 15(20) | |
| (HDPE) Accumulator weight(HDPE) | KG | 11(15) | |
Delivery Time:
- No later than 65 days after receipt of the deposit
Training:
- We provide training service for two or three operating men for free (but the cost for trainer's board and lodging is not included).
Installation:
-Â The supplier will send one specialist to test run the machine until it is running in normal state.
Guarantee:
-Â Our guarantee is valid for a period of 12 months. If the malfunction caused of the machine's self quality, we will troubleshoot it for free.
Auxiliary Equipments:
- Auxiliary equipments for production line are available and optional, please kindly ask for quotation.Â
we provide Lead Acid Battery Breaking and Battery separating system, battery cutter, desulfurization unit, lead melting and reduction blast furnace, rotary furance for lead melting, lead refinery kettle, lead refinery pot.
The battery breaking and separating are key steps at whole Battery Recycling process. After battery grinding and separating, there are four output (Grid, Lead paste , PVC/PP, Acid). Recycling the Lead,Plastic,Acid from batteries.The Waste Batteries include but are not limited to car batteries, golf cart batteries, UPS batteries, industrial fork-lift batteries, motorcycle batteries, and commercial batteries Smelting and refinery technologies are mature technologies.
Lead Acid Battery Recycling Plant
Lead Acid Battery Recycling Plant,Scrap Lead Battery Recycling Plant,Car Battery Recycling Plant,Used Auto Battery Recycling Machine
Jiangxi Mingxin Resource Recycling Co.,Ltd , http://www.weee-china.com