Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

Model NO.: ACE-RF-A2
Manufacturing Way: Forging
Main Part: SUS304/SUS316
Pressure: 300lbs, 600lbs, 900lbs...
Surface Finish: Mill Finish, Anodized, Powder Coated, Wooden Finis
Thickness: From 15mm to 300mm
Packing: Shrink Wrap- Carton Case Exporting Plywood Case
Flow Type: L, L/L, T/L, T, L/T, T/T
Temper: H112 . F , O, T
Compressive Strength: 10000
Connect: Welding or Casting
Trademark: ACE
Transport Package: Plwooden Box or as Customers′ Requirement for Good
Specification: Diameter: 300~2000mm
Origin: China
HS Code: 730721
Model NO.: ACE-RF-A2
Manufacturing Way: Forging
Main Part: SUS304/SUS316
Pressure: 300lbs, 600lbs, 900lbs...
Surface Finish: Mill Finish, Anodized, Powder Coated, Wooden Finis
Thickness: From 15mm to 300mm
Packing: Shrink Wrap- Carton Case Exporting Plywood Case
Flow Type: L, L/L, T/L, T, L/T, T/T
Temper: H112 . F , O, T
Compressive Strength: 10000
Connect: Welding or Casting
Trademark: ACE
Transport Package: Plwooden Box or as Customers′ Requirement for Good
Specification: Diameter: 300~2000mm
Origin: China
HS Code: 730721

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 
STANDARD SIZE PRESSURE TYPE
EN EN1092-1 DN10-DN600 PN16-PN100 PL BL WN SO LAP SW TH
         
ANSI ANSI B16.5 DN10-DN600 150LBS ~ 3000LBS PL BL WN SO LAP SW TH
ANSI B16.47 DN10-DN600 150LBS ~ 3000LBS PL BL WN SO LAP SW TH
         
JIS JIS B2220 DN10-DN600 5K-40K PL,BL
         
DIN DIN 2573,2576 DN10-DN600 PN6 SO
DIN 2543,2544 DN10-DN600 PN16 SO
DIN 2527 DN10-DN600 PN6-PN100 BL
DIN 2541,2542 DN10-DN600 PN6,PN10 LAP
DIN 2501,2502,2503 DN10-DN600 PN16,PN25,PN40 SO
         
BS BS 4504 DN10-DN600 PN10,PN40 SO,BL
BS10 TABLE - D / E / F DN10-DN600  -  SO, LAP
         
GOST GOST 12820-80 DN10-DN600 PN6-PN25 SO,BL
GOST 12820-81 DN10-DN600 PN6-PN40 WN
         
SABS SABS 1123 DN10-DN600 PN6-PN25 PL,SO,BL,WN


Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 
JIS B2220 JIS B2238 JIS G3451 
Type SOH  SOP WN BL 
Type Plate flange ,Lap Joint Flange ,Threaded flange,Socket Welding Flange, Blind Flange, Slip on Flange .
Material Carbon steel , Stainless steel , Alloy steel
Size 3/8-60" DN10-1500    3/8-16" DN10-400
Pressure 5K-30K  2K 40K 63K
Technics Forged,Cast.
Connection welding
Sealing surface FF RF M F M TG  RJ
Surfac e
treatment		 Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc
Producing process Billet-cutting-forging-heating-lathe-drilling-inspection-marking-packing-export-din flange
Application Fields Chemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry
Building Industry /Ship-building Industry 
Supply Capacity 2 000tons  per  year
Min   O rder Quantity 1 ton
Inspection factory in-house self check or Third Party inspection
PACKING plywood cases, pallets, nylon bags or according to the customers' requirements
Delivery It is generally Within 30 days after receiving your payment
TRADE TERM FOB, CNF&CFR, CIF
PAYMENT TT or L/C
CERTIFICATES ISO-9001/2000,API,PED
Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges





weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.


Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.

Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges
 

1) ANSI B16.5, ASME B16.47 FLANGE

Size range: 1/2" to 80"  DN15 to DN2000

Design: welding neck, slip on, blind, socket welding, threaded, lap-joint

Pressure: 150#, 300#, 600#,900#,1500#, 2500#

Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS

Material: carbon steel A105, stainless steel  304/304L, 316/316L

Coating: black paint, yellow transparent paint, cold and hot dip galvanize

Package: seaworthy plywooden case, wooden pallet

2) EN1092-1 FLANGE

Size range: DN15 to DN2000

Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking

             type12 slip on flange, type 13 threaded flange

Pressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100

Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L

Coating: black paint, yellow transparent paint, cold and hot dip galvanize

Package: sea worthy plywooden case, wooden pallet

3) DIN FLANGE

Size range: DN15 to DN2000

Design: slip on flange DIN2573,2576,2502,2503, 2543,2545

             welding neck falnge DIN2631, 2632,2633,2634,2635

              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40

              threaded falnge DIN2565,2566,2567,2567

              loose flange DIN 2641,2642,2656,2673

Material: carbon steel ST37.2, stainless steel 1.4301, 1.4404

Coating: rust-proof oil, transparent paint, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

4) GOST FLANGE

Size range: DN15 to DN 2000

Design : plate falnge 12820-80, welding neck flange 12821-80

Pressure: PN6, PN10, PN16, PN25, PN40

Material: carbon steel CT-20, stainless steel 304/304L, 316/316L

Coating: rust-proof oil, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

5) JIS FALNGE

Size ragne : 15A to 2000A

Design: SOP, BIND, SOH,

Puressure: 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K

Material: carbon steel SS400, stainless  steel SUS304, SUS316

Coating : rust-proof oil, cold  and hot galvanize

Packing: sea worthy plywooden case, wooden pallet

Material: Carbon steel: ASTM A105,A350 LF2,  A694 etc.

                Stainless steel: ASTM A182 F304 , 304L,,F304L,F316,316L , AISI 304 , AISI 321

                Alloy steel: ASTM A182 A182 F12,F11,F22,F5,F9,F91etc.

  

ITEM

STANDARD   

 

STNDARD CODE         

          PRESSURE RATE

       TYPE                     

  SIZE                   

1

American standard   

ANSI B16.5

Class 150,300,600,

900,1500,2500

WN, SW,SO,BL, 

TH,LWN

1/2"-24"

 

 

 

ANSI B16.36

Class 150,300,600,

900,1500,2500

WN, SO, TH

1/2"-24"

AWWA

Class B D E F

RING(HUB) flange

3"-144"

ASEM B16.47

Class 150,300,600,900

WN, BL

26"-60"

2

British standard

BS4504

PN6,10,16,25,40

WN,SO,PL,BL

 DN10-DN2000

 3

European standard

EN1092

PN2,5,6,25,40,100,

160,250,320,400 

WN,SO,PL,BL

 DN10-DN4000

 4

Japanese standard

JIS B2210

5K, 10K, 16K, 30K

SOP(PL,BL), SOH,

(SO A,B,C), WN

 10A-1500A

 5

Italy

UNI 6091-6099

UNI 2280-2286

UNI 2253-2257

PN6,25,40,100,

160,250,320,400 

BL,WN,PL,SO

 DN15-500

 6

Germany

DIN

PN2,5,6,10,16,

25,40,64,100,160

SO,BL,PL,WN,

LOOSE,TH

 DN10-4000

  

 

 

 

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 

 

Eddy Test on line. X-Ray Fault detection, Direct Reading Spectrometer, Impact test machine.  Physical & Chemical Testing,  Manganese phosphorus silicon chemical analyser, Tension Test, Hardness tester, etc.

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

(1) PIPE FITTINGS SERIES
ASME B 16.9/MSS SP 75 Elbow,Tee,Reducer,Cap,stub end,
Material:CS:A234WPB/WPC,A420WPL3/WPL6/WPL9,A860WPHY52/60/65/70
              AS:A234WP1/5/9/11/22/91
             SS:A403WP304/304L/316/316L/317/321
             Aluminum:1070A,1060,1100,1200 ,2A11,2017,2A12,2024 ,3003    3A21,5A02,5052,5A03,5A05,5A06,5083,5086,5454,6061,6063,6A02,6082,6005 
  
(2)FLANGES SERIES:
DIN 2573 PN6 DIN 2576 PN10 DIN2502 PN16 DIN2503 P25-40 DIN2566 PN16 ,DIN2631-2635 RST37.2 OR C22.8 carbon steel flange 
ANSI B16.5, 150LB 300LB 600LB 900LB 1500LB 2500LB WNRN SORF BLRF THRF SWRF LJRF 
JIS SS400 OR SF440 5K 10K 16K 20K 30K SOPFF SOHFF BLFF 
EN1092 PN6 PN10 PN16 PN25 PN40 TYPE1 TYPE2 TYPE 5 TYPE 12 TYPE 13 
BS4504 SANI1123 1000/3 1600/3 2500/3 T/D T/E T/F 

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges
 

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 
STANDARD SIZE PRESSURE TYPE
EN EN1092-1 DN10-DN600 PN16-PN100 PL BL WN SO LAP SW TH
         
ANSI ANSI B16.5 DN10-DN600 150LBS ~ 3000LBS PL BL WN SO LAP SW TH
ANSI B16.47 DN10-DN600 150LBS ~ 3000LBS PL BL WN SO LAP SW TH
         
JIS JIS B2220 DN10-DN600 5K-40K PL,BL
         
DIN DIN 2573,2576 DN10-DN600 PN6 SO
DIN 2543,2544 DN10-DN600 PN16 SO
DIN 2527 DN10-DN600 PN6-PN100 BL
DIN 2541,2542 DN10-DN600 PN6,PN10 LAP
DIN 2501,2502,2503 DN10-DN600 PN16,PN25,PN40 SO
         
BS BS 4504 DN10-DN600 PN10,PN40 SO,BL
BS10 TABLE - D / E / F DN10-DN600  -  SO, LAP
         
GOST GOST 12820-80 DN10-DN600 PN6-PN25 SO,BL
GOST 12820-81 DN10-DN600 PN6-PN40 WN
         
SABS SABS 1123 DN10-DN600 PN6-PN25 PL,SO,BL,WN


Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 
JIS B2220 JIS B2238 JIS G3451 
Type SOH  SOP WN BL 
Type Plate flange ,Lap Joint Flange ,Threaded flange,Socket Welding Flange, Blind Flange, Slip on Flange .
Material Carbon steel , Stainless steel , Alloy steel
Size 3/8-60" DN10-1500    3/8-16" DN10-400
Pressure 5K-30K  2K 40K 63K
Technics Forged,Cast.
Connection welding
Sealing surface FF RF M F M TG  RJ
Surfac e
treatment		 Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc
Producing process Billet-cutting-forging-heating-lathe-drilling-inspection-marking-packing-export-din flange
Application Fields Chemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry
Building Industry /Ship-building Industry 
Supply Capacity 2 000tons  per  year
Min   O rder Quantity 1 ton
Inspection factory in-house self check or Third Party inspection
PACKING plywood cases, pallets, nylon bags or according to the customers' requirements
Delivery It is generally Within 30 days after receiving your payment
TRADE TERM FOB, CNF&CFR, CIF
PAYMENT TT or L/C
CERTIFICATES ISO-9001/2000,API,PED
Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges





weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.


Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.

Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges
 

1) ANSI B16.5, ASME B16.47 FLANGE

Size range: 1/2" to 80"  DN15 to DN2000

Design: welding neck, slip on, blind, socket welding, threaded, lap-joint

Pressure: 150#, 300#, 600#,900#,1500#, 2500#

Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS

Material: carbon steel A105, stainless steel  304/304L, 316/316L

Coating: black paint, yellow transparent paint, cold and hot dip galvanize

Package: seaworthy plywooden case, wooden pallet

2) EN1092-1 FLANGE

Size range: DN15 to DN2000

Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking

             type12 slip on flange, type 13 threaded flange

Pressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100

Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L

Coating: black paint, yellow transparent paint, cold and hot dip galvanize

Package: sea worthy plywooden case, wooden pallet

3) DIN FLANGE

Size range: DN15 to DN2000

Design: slip on flange DIN2573,2576,2502,2503, 2543,2545

             welding neck falnge DIN2631, 2632,2633,2634,2635

              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40

              threaded falnge DIN2565,2566,2567,2567

              loose flange DIN 2641,2642,2656,2673

Material: carbon steel ST37.2, stainless steel 1.4301, 1.4404

Coating: rust-proof oil, transparent paint, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

4) GOST FLANGE

Size range: DN15 to DN 2000

Design : plate falnge 12820-80, welding neck flange 12821-80

Pressure: PN6, PN10, PN16, PN25, PN40

Material: carbon steel CT-20, stainless steel 304/304L, 316/316L

Coating: rust-proof oil, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

5) JIS FALNGE

Size ragne : 15A to 2000A

Design: SOP, BIND, SOH,

Puressure: 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K

Material: carbon steel SS400, stainless  steel SUS304, SUS316

Coating : rust-proof oil, cold  and hot galvanize

Packing: sea worthy plywooden case, wooden pallet

Material: Carbon steel: ASTM A105,A350 LF2,  A694 etc.

                Stainless steel: ASTM A182 F304 , 304L,,F304L,F316,316L , AISI 304 , AISI 321

                Alloy steel: ASTM A182 A182 F12,F11,F22,F5,F9,F91etc.

  

ITEM

STANDARD   

 

STNDARD CODE         

          PRESSURE RATE

       TYPE                     

  SIZE                   

1

American standard   

ANSI B16.5

Class 150,300,600,

900,1500,2500

WN, SW,SO,BL, 

TH,LWN

1/2"-24"

 

 

 

ANSI B16.36

Class 150,300,600,

900,1500,2500

WN, SO, TH

1/2"-24"

AWWA

Class B D E F

RING(HUB) flange

3"-144"

ASEM B16.47

Class 150,300,600,900

WN, BL

26"-60"

2

British standard

BS4504

PN6,10,16,25,40

WN,SO,PL,BL

 DN10-DN2000

 3

European standard

EN1092

PN2,5,6,25,40,100,

160,250,320,400 

WN,SO,PL,BL

 DN10-DN4000

 4

Japanese standard

JIS B2210

5K, 10K, 16K, 30K

SOP(PL,BL), SOH,

(SO A,B,C), WN

 10A-1500A

 5

Italy

UNI 6091-6099

UNI 2280-2286

UNI 2253-2257

PN6,25,40,100,

160,250,320,400 

BL,WN,PL,SO

 DN15-500

 6

Germany

DIN

PN2,5,6,10,16,

25,40,64,100,160

SO,BL,PL,WN,

LOOSE,TH

 DN10-4000

  

 

 

 

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

 

 

Eddy Test on line. X-Ray Fault detection, Direct Reading Spectrometer, Impact test machine.  Physical & Chemical Testing,  Manganese phosphorus silicon chemical analyser, Tension Test, Hardness tester, etc.

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges

(1) PIPE FITTINGS SERIES
ASME B 16.9/MSS SP 75 Elbow,Tee,Reducer,Cap,stub end,
Material:CS:A234WPB/WPC,A420WPL3/WPL6/WPL9,A860WPHY52/60/65/70
              AS:A234WP1/5/9/11/22/91
             SS:A403WP304/304L/316/316L/317/321
             Aluminum:1070A,1060,1100,1200 ,2A11,2017,2A12,2024 ,3003    3A21,5A02,5052,5A03,5A05,5A06,5083,5086,5454,6061,6063,6A02,6082,6005 
  
(2)FLANGES SERIES:
DIN 2573 PN6 DIN 2576 PN10 DIN2502 PN16 DIN2503 P25-40 DIN2566 PN16 ,DIN2631-2635 RST37.2 OR C22.8 carbon steel flange 
ANSI B16.5, 150LB 300LB 600LB 900LB 1500LB 2500LB WNRN SORF BLRF THRF SWRF LJRF 
JIS SS400 OR SF440 5K 10K 16K 20K 30K SOPFF SOHFF BLFF 
EN1092 PN6 PN10 PN16 PN25 PN40 TYPE1 TYPE2 TYPE 5 TYPE 12 TYPE 13 
BS4504 SANI1123 1000/3 1600/3 2500/3 T/D T/E T/F 

Aluminum Forged Blind, Plate, Threaded, Socket Welding Neck, Pipe Fittings, Slip on Flanges
 

ATV Brake Pad

Brake pads are a component of disc brakes used in automotive and other applications. Brake pads are steel backing plates with friction material bound to the surface that faces the disc brake rotor. Brake pads convert the kinetic energy of the vehicle to thermal energy through friction. Two brake pads are contained in the brake caliper, with their friction surfaces facing the rotor. When the brakes are hydraulically applied, the caliper clamps or squeezes the two pads together onto the spinning rotor to slow/stop the vehicle.

ATV Brake Pad

ATV Brake Pad,ATV Sintered Brake Pad,ATV Semi-Metal Brake Pad

Quzhou Hipsen Vehicle Parts Co., Ltd , http://www.hbs-parts.com

This entry was posted in on