Fangyuan EPS Insulated Concrete Forms Styrofoam Machine for Sale

1. Main Features of EPS Insulated Concrete Forms Styrofoam Machine for Sale
Main Features
Unique machine structure:
a. High-strength frame: The further enhanced back frame and moving frame, the whole EPS automatic shape moulding machine adopts the body and foot, and makes the frame and machine feet integrated, This greatly increases the frames strength and sturdiness.
b. The EPS automatic shape moulding machines are treated with zinc spraying after the manufacturing works which improves load life of the machine.
c. The automatic moulding machine with vacuum adopts opposite directions type tie bar for easy maintenance and wear resistance. The self-lubricating copper tube which solves original tie bar bushing's problem and improves the lubrication effectiveness.
d. The preventing plate and back mould plate of the automatic moulding machine with vacuum are all stainless steel, which reduces the wear and rust of the mold precision.
Hydraulic Pressure System:(save 6S/cycle):
a. Compared to the T and A type machine, our new E type machine with hydraulic system achieves faster operation for 250mm/speed from 180mm/second. The automatic moulding machine with vacuum can effectively improve production efficiency.
b. Hydraulic cylinders for the machine frame movement have safety locking of the mold during the steaming process and avoids the leakage of steam.
c. Special hydraulic pressure design: the ejecting cylinder and de-mold cylinder can be running simultaneously, which senses the de-mold gas blowing and product ejection synchronization effectively, reducing running time and improves de-mold capability.
Steam System:(ensure stable and less steam consumption)
a. Fang-Yuan patented PID system made by DN50 actuator makes the sensitive steam pressure control between 0.10-0.15Mpa,+/0.1Mpa tolerance giving us reduced heating time saving around 25%-30% of energy consumption.
b. The thermocol shape moulding machine controls the steam pressure by balance valve and pressure sensor instead of electronic connector pressure gauge. The mold pressure can be set by touch screen to make easy and accurate control.
Piping System:
a.For the complete inlet and outlet of water, air and steam, we use big pipeline and vales which are very close to the mold, reducing the excess energy consumption, while improving running speed of the thermocol shape moulding machine.
Vacuum System:
a.The EPS automatic moulding machine adopts vertical vacuum system, with 4-6" large drain pipeline and long length of condensation drainpipe. The vacuum tank is equipped with a big spraying system,which sprays the rising hot steam directly, and increases condensation rate. Thus,improving vacuum suction efficiency and achieves vacuum as main cooling instead of main water cooling(normally water cooling will be set only 8-12s). This enables the product of water percentage≤10%,In addition, the spray header of the replacement and maintenance is very convenient.
Control System:
a. All pressure adjustments of EPS automatic moulding machine are remote controlled by the control box, such as cross steaming, Main steaming, Filling also adjusted in touch screen according to different foaming area. The program also has many self-protection and alarm systems.
b. The thermocol shape moulding machine adoptes remote control system for all control pressure parts, electrics parts, valves, gauges and hydraulic parts sourced from famous international brands with quality to ensure stable and smooth running.

2. Technical Data of EPS Insulated Concrete Forms Styrofoam Machine for Sale
Estabished in 1988, We specialize in manufacturing all kinds of EPS(expandable polystyrene) machine, these are widely applicable in the package and construction sectors, such as vegetable and fish box, electric parts package, wall and roof indulation, house decoration and so on. ----------------------------------------------------------------------------------------------------------------
2. Pictures of EPS Insulated Concrete Forms Styrofoam Machine for Sale



----------------------------------------------------------------------------------------------------------------
Packaging & Shipping
Packing: standard exporting package
Shipping port: shanghai/ningbo


----------------------------------------------------------------------------------------------------------------
WE can provided this service
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc. 
3. Engineers go to clients' factory in time for installation , training and trial production . 
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.    
----------------------------------------------------------------------------------------------------------------
Our Company information

 

----------------------------------------------------------------------------------------------------------------
How to contact us?
Add: Xindeng industrial zone,Fuyang, Hangzhou city, Zhejiang province, China
Pc: 311404
Fax:/Tel: +86-571-63252570

1. Main Features of EPS Insulated Concrete Forms Styrofoam Machine for Sale
Main Features
Unique machine structure:
a. High-strength frame: The further enhanced back frame and moving frame, the whole EPS automatic shape moulding machine adopts the body and foot, and makes the frame and machine feet integrated, This greatly increases the frames strength and sturdiness.
b. The EPS automatic shape moulding machines are treated with zinc spraying after the manufacturing works which improves load life of the machine.
c. The automatic moulding machine with vacuum adopts opposite directions type tie bar for easy maintenance and wear resistance. The self-lubricating copper tube which solves original tie bar bushing's problem and improves the lubrication effectiveness.
d. The preventing plate and back mould plate of the automatic moulding machine with vacuum are all stainless steel, which reduces the wear and rust of the mold precision.
Hydraulic Pressure System:(save 6S/cycle):
a. Compared to the T and A type machine, our new E type machine with hydraulic system achieves faster operation for 250mm/speed from 180mm/second. The automatic moulding machine with vacuum can effectively improve production efficiency.
b. Hydraulic cylinders for the machine frame movement have safety locking of the mold during the steaming process and avoids the leakage of steam.
c. Special hydraulic pressure design: the ejecting cylinder and de-mold cylinder can be running simultaneously, which senses the de-mold gas blowing and product ejection synchronization effectively, reducing running time and improves de-mold capability.
Steam System:(ensure stable and less steam consumption)
a. Fang-Yuan patented PID system made by DN50 actuator makes the sensitive steam pressure control between 0.10-0.15Mpa,+/0.1Mpa tolerance giving us reduced heating time saving around 25%-30% of energy consumption.
b. The thermocol shape moulding machine controls the steam pressure by balance valve and pressure sensor instead of electronic connector pressure gauge. The mold pressure can be set by touch screen to make easy and accurate control.
Piping System:
a.For the complete inlet and outlet of water, air and steam, we use big pipeline and vales which are very close to the mold, reducing the excess energy consumption, while improving running speed of the thermocol shape moulding machine.
Vacuum System:
a.The EPS automatic moulding machine adopts vertical vacuum system, with 4-6" large drain pipeline and long length of condensation drainpipe. The vacuum tank is equipped with a big spraying system,which sprays the rising hot steam directly, and increases condensation rate. Thus,improving vacuum suction efficiency and achieves vacuum as main cooling instead of main water cooling(normally water cooling will be set only 8-12s). This enables the product of water percentage≤10%,In addition, the spray header of the replacement and maintenance is very convenient.
Control System:
a. All pressure adjustments of EPS automatic moulding machine are remote controlled by the control box, such as cross steaming, Main steaming, Filling also adjusted in touch screen according to different foaming area. The program also has many self-protection and alarm systems.
b. The thermocol shape moulding machine adoptes remote control system for all control pressure parts, electrics parts, valves, gauges and hydraulic parts sourced from famous international brands with quality to ensure stable and smooth running.

2. Technical Data of EPS Insulated Concrete Forms Styrofoam Machine for Sale
Estabished in 1988, We specialize in manufacturing all kinds of EPS(expandable polystyrene) machine, these are widely applicable in the package and construction sectors, such as vegetable and fish box, electric parts package, wall and roof indulation, house decoration and so on. ----------------------------------------------------------------------------------------------------------------
2. Pictures of EPS Insulated Concrete Forms Styrofoam Machine for Sale



----------------------------------------------------------------------------------------------------------------
Packaging & Shipping
Packing: standard exporting package
Shipping port: shanghai/ningbo


----------------------------------------------------------------------------------------------------------------
WE can provided this service
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc. 
3. Engineers go to clients' factory in time for installation , training and trial production . 
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.    
----------------------------------------------------------------------------------------------------------------
Our Company information

 

----------------------------------------------------------------------------------------------------------------
How to contact us?
Add: Xindeng industrial zone,Fuyang, Hangzhou city, Zhejiang province, China
Pc: 311404
Fax:/Tel: +86-571-63252570

Embossing Machine

Embossing Machine,Embossing Machinery,Heat Transfer

Printing Machine, Embossing Machine,Pleating Machine Co., Ltd. , http://www.nsprintingmachine.com