There are many differences between oil and gas lubrication and other traditional lubrication methods. The Dopsey trace oil and gas lubrication technology has obvious advantages.
Modular design, lubrication points increase or decrease according to the actual application. The amount of oil and gas can be provided in a regular and quantitative manner, enabling on-demand supply and avoiding waste of resources;
Oil-air lubrication can maintain continuous fresh lube oil input while reducing the bearing temperature rise while maintaining the position of the bearing and the location of the friction. Tests have proved that, under the same rotation speed, oil-gas lubrication of spindle bearings of the same type and under the same working conditions can reduce the temperature rise of the outer ring by 9°C to 16°C lower than that of oil mist lubrication, while maintaining the same temperature rise of the outer ring of the bearing, Oil and gas lubrication can increase the bearing speed factor by more than 25%;
Oil and gas lubrication has little or no pollution to the environment. The gas discharged through the bearing is basically compressed air, basically free of oil or containing very little oil, which is good for the health of workers.
Due to the continuous supply of fresh lubricating oil and the outflow of fresh air inside the bearing, foreign materials are difficult to enter and internal dirt is easily discharged, which can greatly increase the service life of the bearing.
Oil-air lubrication is the continuous and accurate delivery of trace amounts of lubricants to the interior of the spindle bearing, which is both energy-efficient and environmentally friendly, reduces costs, and increases reliability.
From this, it can be seen that Peifeng Dosapride trace oil and gas lubrication not only has unique and professional technical advantages, but also conforms to relevant environmental protection policies, and is in line with the spirit of resource conservation, environmental friendliness, rational lubrication, and effective efficiency, and has broad prospects for development.
Modular design, lubrication points increase or decrease according to the actual application. The amount of oil and gas can be provided in a regular and quantitative manner, enabling on-demand supply and avoiding waste of resources;
Oil-air lubrication can maintain continuous fresh lube oil input while reducing the bearing temperature rise while maintaining the position of the bearing and the location of the friction. Tests have proved that, under the same rotation speed, oil-gas lubrication of spindle bearings of the same type and under the same working conditions can reduce the temperature rise of the outer ring by 9°C to 16°C lower than that of oil mist lubrication, while maintaining the same temperature rise of the outer ring of the bearing, Oil and gas lubrication can increase the bearing speed factor by more than 25%;
Oil and gas lubrication has little or no pollution to the environment. The gas discharged through the bearing is basically compressed air, basically free of oil or containing very little oil, which is good for the health of workers.
Due to the continuous supply of fresh lubricating oil and the outflow of fresh air inside the bearing, foreign materials are difficult to enter and internal dirt is easily discharged, which can greatly increase the service life of the bearing.
Oil-air lubrication is the continuous and accurate delivery of trace amounts of lubricants to the interior of the spindle bearing, which is both energy-efficient and environmentally friendly, reduces costs, and increases reliability.
From this, it can be seen that Peifeng Dosapride trace oil and gas lubrication not only has unique and professional technical advantages, but also conforms to relevant environmental protection policies, and is in line with the spirit of resource conservation, environmental friendliness, rational lubrication, and effective efficiency, and has broad prospects for development.
The sector belt of the turning belt conveyor is equipped with a special anti deviation roller (POM is added to the bearing) or high-frequency welding guide ribs are welded on the outside of the conveyor belt to make the conveyor belt run in a special guide rail. The roller adopts a special conical rubber wrapping roller. The turning Belt Conveyor can transport a wide variety of materials, not only various bulk materials, but also various cartons, packaging bags and other pieces of goods with small single weight, which are widely used.
Turning Conveyor,Turning Belt Conveyor,Roller Turning Machine,Assembly Line Automation Equipment
Foshan Heiteng Intelligent Technology Co., Ltd , https://www.fsheitengproductionline.com