Box Cabinet Contain Tmv Thermostatic Mixing Valve for Shower

Description

• TMVs are Watermark approved to AS4032.1 and NSW Health approved.
• Provides tepid warm water at 76 l/min at 210kPa as per AS4775 requirements.
• 15mm valve provides tepid water as low as  2.5l/min if required for use in combination units.
• Union inlets have integrated strainer and check valves.
• Valve will shut off supply upon failure of cold water supply.
• Cold water will bypass the TMV upon failure of hot water supply.
• TMV set temperature can be locked using the locking nut on the adjustment spindle. 
• Available in SS 70mm deep recessed enclsoure or on a galvanised steel plate.
• Custom configurations.

Technical Specifications
 
Advantage

• Simplifies TMV installation on surface or wall recessed and Easily maintained.
• Removable lid with keyed security lock, securely houses and protects each TMV. 
• Far more precise control over mixed hot water temperature than can be achieved with simple tempering valves.    
• Complete Kit Installations.    
• Safety first! 1.Quick-react temperature fluctuation feature which controls outlet temperature to +/-2°C. 
•                      2.Quick Stop Anti-scald feature 
                       3.Cold shock fail safe feature 
                       4.Hot temperature fluctuation stability feature. 
                       5.Cold temperature fluctuation stability 
                       6.Quick react pressure feature 
                       7.Unequal inlet pressures easily controlled 
                       8.Drips from the valve will be less than 46°C, 
                       9.Dormant period restart safety feature           

Emergency Mixing System
  Application

• Suitable for both indoor and outdoor installation.

Pressure Loss Chart

Fault Finding in Common


 

Magnesium Die Casting

In the past, the use of magnesium alloy die castings was relatively small, and now it is slowly increasing. Because magnesium alloys have the characteristics of low density and strong rigidity, many parts of shells and brackets use magnesium die castings. For example, the fast-developing mobile phones and notebook computers in recent years often use magnesium die casting for the support frame and the back shell. However, compared with aluminum alloy die casting and zinc alloy die casting, the cost of magnesium alloy die-casting will be relatively high.

The melting point of magnesium alloy is relatively low, and it needs effective gas protection during die casting, which is easy to oxidize and burn. Therefore, the professionalism of die casting is relatively strong, and the requirements for die casting personnel are generally relatively high. SCZY has professional and technical personnel for die-casting magnesium alloy products to ensure the quality of the products. Including one-stop services such as precision CNC machining and surface treatment provided later.

Magnesium Die Casting,Magnesium Alloy Die-Cast,Magnesium Alloy Die Casting In Automobile,Magnesium Alloy Die Casting Processing,Magnesium Die Casting Parts

Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com